Jl-audio Stealthbox SB-F-RTRKCTR/12W3v2-D2 Manuel d'utilisateur télécharger pdf

➔

Stealthbox

INSTALLATION GUIDE

SB-F-RTRKCTR/12W3v2-D2, JL AUDIO, Inc 2002

Sheet SKU#011159 Revision 11/18/2003Page 1

for the

SB-F-RTRKCTR/12W3v2

Rear Console Only

(Fits 2002-Up Ford SuperCrew

Harley Davidson, King Ranch;

2001-2002 Lincoln Navigator and

2002 Blackwood )

This Stealthbox is a product

which requires professional

installation skills and tools.

Please read this installation guide

thoroughly before beginning the

project. It will guide you step by

step through the installation. Several

of the steps in this process may

require two people to accomplish.

It is absolutely vital that the

enclosure be properly mounted to

the vehicle according to these

instructions. Failure to mount the

enclosure properly presents two

problems: 1) The sub-bass

performance will suffer due to the

movement of the enclosure caused

by the force exerted by the

woofer(s) and 2) A loose enclosure

presents a serious safety hazard in

the event of a collision or sudden

deceleration.

Please enjoy your JL Audio

Stealthbox responsibly.

STEP 1:

Remove front exposed pocket,

internal instert and rubber flooring.

STEP 2:

With an 8mm socket and long

extenstion, remove the four bolts. Located

where the front pocket was removed from in

STEP 1.

STEP 3:

Remove the pair of bolts from side

rear of the OEM console.

You will have to lower the two rear seats and

lift up drop flooring to expose the bolts.

After the pair of bolts are removed, remove

OEM console out of truck.

STEP 4:

With the OEM console removed

you , unbolt the rear bracket.

STEP 5:

The Stealthbox is shipped with two

brackets attacahed to it. Remove the rear

angle bracket from the Stealthbox.

Mount this black angle bracket to where the

OEM bracket was removed.

Use the three bolts that was removed in

STEP4.

STEP 6:

The top picture shows how the front

bracket is installed when shipped.

Remove all mounting hardware and flip the

front bracket. Remount the flipped bracket

with the same hardware.

The bottom picture shows the bracket

properly mounted for install.

START

HERE

Continued on Page 2 ➔

www.jlaudio.com

➔

1 2 3 4

Résumé du contenu

Page 1 - Stealthbox

➔➔➔➔➔Stealthbox®INSTALLATION GUIDESB-F-RTRKCTR/12W3v2-D2, JL AUDIO, Inc 2002Sheet SKU#011159 Revision 11/18/2003Page 1for theSB-F-RTRKCTR/12W3v2Rear

Page 2 - Continued on Page 3 ➔

➔➔➔➔➔➔STEP 7:Position the Stealthbox into location.Hand tighten front of Stealthbo;, using thesupplied pair of1” sapcers, pair of lock washers,pair of

Page 3 - Continued on Page 4 ➔

➔Continued on Page 4 ➔➔➔➔➔STEP 17: A) Line up small angle bracket to frontmiddle of OEM inner(cut) console and mark hole.STEP 17: B) Using an 1/8” dr

Page 4 - XR570-CXi

Specifications:Enclosure Type: Acoustic Suspension (Sealed)Driver Type: One JL AUDIO 12W3v2-D2 SubwooferNominal Impedance: 4ΩCont. Power Handling: 300

Commentaires sur ces manuels

Pas de commentaire

Jl-audio Stealthbox SB-F-RTRKCTR/12W3v2-D2 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Haut-parleurs pour voitures Jl-audio Stealthbox SB-F-RTRKCTR/12W3v2-D2. JL Audio Stealthbox SB-F-RTRKCTR/12W3v2-D2 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Haut-parleurs pour voitures Jl-audio Stealthbox SB-F-RTRKCTR/12W3v2-D2