Jl-audio Slampak SLPK-CAN-SPYDER1 Manuel d'utilisateur télécharger pdf

I N S T A L L A T I O N G U I D E

for the

SLPK-CAN-SPYDER1

SKU#94491& 94490

Thank you for choosing a JL Audio Slampak

for your motorcycle sound system. With proper

installation, your new vehicle-specific enclosed sound system will deliver years of listening pleasure.

We strongly recommend that you have your new Slampak

installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox

be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Empty out the front storage space of the motorcycle so that

you have a clean area to work in.

If you are only installing the pods, skip to

STEP 16.

Continued on Next Page

S T E P 2

Remove the bottom panel above the rear tire as show here

S T E P 3

Lift the seat, remove the panel that simulates a gas tank at

the top center of the motorcycle. Remove the two panels

labelled “can-am” (one on each side of the motorcycle) and

the two panels labelled “spyder” (one on each side of the

motorcycle).

SLPK-CAN-SPYDER1_INSTR_SKU# 011312

INSTALLATION

D I F F I C U LT Y :

OUT

ESTIMATED TIME:

1 HOUR

SlamPak

1 2 3 4 5 6 7 8

SLPK-CAN-SPYDER1 1
(954) 443-1100 6

Résumé du contenu

Page 1 - SLPK-CAN-SPYDER1

I N S T A L L A T I O N G U I D E for the SLPK-CAN-SPYDER1 SKU#94491& 94490 Thank you for choosing a JL Audio Slampak® for your motorcycle sou

Page 2

Continued on Next Page SLPK-CAN-SPYDER1_INSTR_SKU# 011312S T E P 7Looking down from the top front of the storage compartment, notice where the wire

Page 3

Continued on Next Page SLPK-CAN-SPYDER1_INSTR_SKU# 011312S T E P 1 5Install the 3/8-16 x 1-1/4” Hex Head Bolt through the included Split Lock Washer

Page 4

SLPK-CAN-SPYDER1_INSTR_SKU# 011312Page 4• JL Audio, Inc 2009S T E P 2 1Drill the holes as marked through the fairing, each hole needs to be 5/16” in

Page 5

Continued on Next Page SLPK-CAN-SPYDER1_INSTR_SKU# 011312S T E P 3 0Again, secure all cables along the full run to ensure that they cannot get tangl

Page 6 - (954) 443-1100

SLPK-CAN-SPYDER1_INSTR_SKU# 011312Page 6• JL Audio, Inc 2009All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo

Page 7

Page 8

Commentaires sur ces manuels

Pas de commentaire

Jl-audio Slampak SLPK-CAN-SPYDER1 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Haut-parleurs pour voitures Jl-audio Slampak SLPK-CAN-SPYDER1. JL Audio Slampak SLPK-CAN-SPYDER1 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Haut-parleurs pour voitures Jl-audio Slampak SLPK-CAN-SPYDER1